WL-0310-11 High Gloss Fast Drying Alkyd Emulsionn For Industrial Coating
Product Introduction
WL-0310-11 is a modified alkyd emulsion that is diluted with water after neutralization with ammonia, and a small amount of co-solvent is added. This product mixes acrylic dispersion with alkyd emulsion, which reduces the content of organic volatiles on the coating surface. Moreover, it has fast drying speed, high gloss, excellent salt spray resistance, can be grinded with pigment and has both the yellowing resistance of acrylic and the good film properties of alkyd resin.
Generally, coatings made of WL-0310 can be applied by spraying, roller coating, brushing or dipping, because WL-0310 has good fluidity and leveling properties. It is recommended to use WL-0310 for indoor and High-performance protective coatings and steel structure coatings for outdoor metal equipment can be used as primers and topcoats.
Composition
- Water based alkyd resin,
- Cosolvent,
- Neutralizer,
- Water
Physical Property
| Non-Volatile Matters (GB/T 1725) |
Viscosity(mPa.s) |
Appearance |
PH value |
TVOC(g/L) |
Water dilution |
| 42±2% |
500-1000 |
white to light brown emulsion |
8.0-10.5 |
≤5% |
Infinite dilution |
Performance:
- Fast drying speed, excellent salt spray resistance,
- This product has high gloss and good anti-corrosion performance.
- Good yellowing resistance, good paint film performance.
- VOC is less than 7%, environmentally friendly
- Good shear stability, can be used for pigment paste grinding;
- Excellent corrosion resistance, good initial water resistance;
- The finished paint has good versatility and can replace oil-based alkyd anti-rust paint, alkyd blend paint, alkyd enamel, etc.
- Has good compatibility.
Application
It can be applied to make enamel, anti-rust primer.
It can be applied to make water-based alkyd mixed paint
Instructions:
- WL-0130 water-based alkyd emulsion contains 5%-1%. Water-based desiccant.
- This product has excellent shear stability and can be directly used for grinding pigment pastes, and compatibility testing is required
- Excellent anti-rust performance in the configured primer
- The finished paint configured with this product needs to be stored under alkaline conditions (pH 7.5-8.5).
- Dilute with deionized water before use. After passing the test, tap water can also be used.
Storage Condition
The product should be stored in a cool place below 38℃,and protected from freezing in winter.Its shelf life is 6 months,and the expired products still can be used if passing the inspection
Special Tip
This material is complied according to our existing technology and experience, the technical advice provided is sincere, but it is not guaranteed to be used in all samples and formulations, all the data are for users reference only.
Product Tags:
|
|
High Gloss Fast Drying Alkyd Emulsion For Industrial Coating Images
|
